Metal Finishing - Decorative

Latest News

Chemical, Paint Suppliers Release 4th Quarter Earnings
Fourth-quarter results from several leading paint suppliers and chemical manufacturers reflect impact of rising demand and cost reductions.
PCI, Nordson to Hold Advanced Powder Coating Workshop
The Powder Coating Institute, or PCI, will hold an advanced two-day hands-on powder coating workshop Feb. 22–23. The event will take place at the headquarters of Nordson Corporation in Amherst, Ohio.
Countdown to SUR/FIN: Automotive Issues High on the Conference Agenda
With Grand Rapids, Mich., serving as the backdrop for SUR/FIN 2010, it’s only fitting that the conference programming reflect the major issues facing the domestic automotive industry. To that end, the National Association for Surface Finishing, NASF, has tapped the Center for Automotive Research, or CAR, to present a timely panel discussion focused on this key bellwether sector.
Aviation Industry to Stay Aloft in 2010 Despite Modest Forecasts for Orders, Air Traffic
Lower backlogs for aircraft parts, as well as uncertainty surrounding aerospace and defense budgets, shouldn't keeping aviation sector from flying high in the new year.
Dörken Showcases New North American Tech Center
Dörken Corporation USA, an operating unit of Dörken MKS-Systeme, Herdecke, Germany and a global leader in the manufacture of corrosion protection coating systems, trademarked under the name DELTA-MKS®, for a variety of parts including fasteners, springs, brackets clips and stamped parts, recently hosted an open house to unveil its new North American Technical Center in Grass Lake, Mich.

Podcasts

Metal Finishing Audio Newscast--February 8, 2010
NASF Announces Washington Forum Updates
Metal Finishing Audio Newscast February 2, 2010
People in the News...Awards & Certifications...Plant Expansions
Metal Finishing Audio Newscast: January 25, 2010
Online registration is now open for SUR/FIN 2010! The event is set to take place June 14–17 at the Devos Place Convention Center in Grand Rapids, Mich.
Everything You Wanted to Know About Rectifiers but Were Afraid to Ask
This special podcast presentation, sponsored by Process Electronics Corporation, will explain the importance of making the right decision when purchasing a rectifier. More importantly, it will clue buyers in on what to look for when partnering with a particular rectifier supplier.

Webinars

Zirconization™ Update: Introducing DuBois Chemicals, DuraTEC 110 Nonphosphate Cleaning and Pretreatment Solutions for Ferrous and Nonferrous Parts
Nonphosphate pretreatment systems are gaining broader acceptance in the market place. Public opinion, regulatory compliance, and environmental stewardship are moving manufacturers away from phosphate-based chemistries.
Alternative Pretreatment Technologies for Steel and Aluminum Surfaces
This informative webinar program will cover current environmentally acceptable alternative pretreatment processes for steel and aluminum surfaces. It will: identify and define conversion coatings; discuss the basics of a zinc phosphate process for ferrous and aluminum surfaces; outline the advantages and disadvantages of zinc phosphate; and delve into the pros and cons of alternative technologies, such as zirconium, titanium, and silane. Ron Joseph, Organic Coatings Editor for Metal Finishing, moderates.

Kevin Biller

Ask The Expert

Powder Coating, including development, manufacturing, quality control, material selection, performance, coating formulation, and UV cure technology
Kevin Biller, a.k.a. Joe Powder, began his career in powder coatings in 1978 at the Glidden Paint Company. He held various technical positions during his 15 years there, including group leaderAutomotiv...

Features

Self-cleaning, Odor-reducing, Water-shedding Properties of Titanium Dioxide Photocatalytic Oxidizing Coatings
A new coating technology developed and commercialized 10 years ago in Japan and just recently introduced to the U.S. offers revolutionary new properties. This new coating technology allows coated surfaces to become self-cleaning of general soil, prevents the formation of a bio-film, has anti-fog and anti-frost properties, reduces odors from indoor spaces in contact with the coated surfaces as well as reduces odors from outdoor air pollution that comes in contact with an exterior surface coated with these coatings.
Members' Content
Drag-Out Reduction Techniques Using Barrel Blow-Down and DSC Dip-Spin-Tilt Technology
Increasing demand for water and stringent new legislation to limit the discharge of effluent is taking place in many areas worldwide. Equipment innovations that reduce water usage and minimize the quantity of chemicals discharged into the environment as treated effluent and sludge have been installed in several state-of-the-art modern electroplating barrel machines that incorporate centrifuge post-treatment systems. The innovations will also supply attractive cost benefits by reducing drag-out.
Members' Content
Non-destructive Testing for Protective Coatings: Implementing a Lifetime Corrosion Prevention Program
During the 20th century cheap and abundant energy made corrosion a manageable problem. This era is coming to an end. Soon, industry will find there is less funding available for corrosion prevention after adjusting for rising energy costs. At this time, management will be forced to decide whether to continue with traditional corrosion control practices or change to something new with a greater potential for energy savings. For many, this will be an extremely difficult decision to make.
Platers/Painters Profile: Danco Anodizing: Pride in Finishing
From medical instruments and implants to more pedestrian applications, Danco Anodizing puts all of their knowledge, heart and soul into every part.

Downloads

Gold Post-Dip to Improve Corrosion-Resistance Properties
Comprehensive test results have been presented for a new, patented gold post-dip treatment that significantly improves the corrosion resistance of nickel/gold deposits and contributes to the reduction of gold costs.
Trivalent Chromium for Enhanced Corrosion Protection on Aluminum Surfaces
A promising alternative to chromate conversion coatings on aluminium is the trivalent chromium–based environmentally friendly conversion coating. This new trivalent chromium process provides high corrosion protection and good paint adhesion while meeting the stringent requirements of military specifications

Latest News

Podcasts

Webinars

Features

Downloads

Members' Login

Not a member?