Enthone Inc., a business of Cookson Electronics, recently became the Canadian distributor for Dipsol America, headquartered in Livonia, Mich. The agreement represents a significant step in the partnership between two of the world’s leading chemical suppliers. 28 February 2010
The AESF Foundation, the educational arm of the National Association for Surface Finishing, is offering finishers customized courses for their employees. 09 February 2010
Fourth-quarter results from several leading paint suppliers and chemical manufacturers reflect impact of rising demand and cost reductions. 08 February 2010
The Powder Coating Institute, or PCI, will hold an advanced two-day hands-on powder coating workshop Feb. 22–23. The event will take place at the headquarters of Nordson Corporation in Amherst, Ohio. 31 January 2010
With Grand Rapids, Mich., serving as the backdrop for SUR/FIN 2010, it’s only fitting that the conference programming reflect the major issues facing the domestic automotive industry. To that end, the National Association for Surface Finishing, NASF, has tapped the Center for Automotive Research, or CAR, to present a timely panel discussion focused on this key bellwether sector. 20 January 2010
Lower backlogs for aircraft parts, as well as uncertainty surrounding aerospace and defense budgets, shouldn't keeping aviation sector from flying high in the new year. 14 January 2010
Dörken Corporation USA, an operating unit of Dörken MKS-Systeme, Herdecke, Germany and a global leader in the manufacture of corrosion protection coating systems, trademarked under the name DELTA-MKS®, for a variety of parts including fasteners, springs, brackets clips and stamped parts, recently hosted an open house to unveil its new North American Technical Center in Grass Lake, Mich. 04 January 2010
Columbia Chemical is now offering COLTEC testing solutions for salt spray cabinets. New equipment including a state-of-the-art water deionization plant has been installed at the company’s world headquarters to manufacture COLTEC DI (deionized water) and COLTEC S-5 (5% sodium chloride solution). 04 January 2010
American Finishing Resources, LLC, or AFR, recently announced its Chilton Coatings Removal and Tooling Fabrication operations have become registered to the ISO 9001:2008 international standard. 03 January 2010
More exciting details are emerging regarding the conference programming for SUR/FIN 2010, set to take place June 14–17 at Devos Place in Grand Rapids, Mich. 14 December 2009
When the curtain lifts on SUR/FIN 2010 in Grand Rapids, Mich., June 15–17, attendees looking for the “same old, same old” are going to be a bit disappointed. That’s because the National Association for Surface Finishing, or NASF, has made significant changes that promise to enhance the overall experience for exhibitors and attendees alike. 09 December 2009
Automated Process Equipment Corporation, or APEC, has merged with West Michigan Powder Coating to form a new division within APEC. The new division retains the name of West Michigan Powder Coating but has moved operations to APEC’s facility in Lake Odessa, Mich. 09 December 2009
Mankiewicz Coatings LLC, a subsidiary of German-based Mankiewicz Gebr. & Co., announced plans to locate a new $2 million facility in Berkeley County, S.C. 09 December 2009
Benchmark Products, Inc., of Indianapolis, Ind., and New Surface Technologies, LLC, of Bedford, Ohio, recently announced the formation of Asterion, LLC, effective Dec. 1, 2009. Asterion will manufacture and sell the entire metal finishing product line of both companies. 11 November 2009
Rinehart Racing has entered into a new state-of-the-art manufacturing arrangement with Clearline Industries, LLC, for the manufacturing of its motorcycle performance exhaust product line. 11 November 2009
The 3rd quarter provided a mixed bag for several of the industry’s leading coating suppliers and chemical manufacturers. Preliminary numbers showed some are still feeling the effects of the global economic downturn, while others are recovering more quickly. 01 November 2009
The Sherwin-Williams Company and Wagner Systems, Inc., have formed an agreement designed to expand the relationship between the two companies, enabling product finishers using Sherwin-Williams innovative ProVisions™ program to purchase Wagner’s line of manual industrial powder coating equipment. 01 November 2009
Honda recently named DuPont Automotive OEM Coatings a Supplier of the Year for outstanding performance in providing products and services. Out of a base of 2,400 suppliers, only 12 companies were recognized. 14 October 2009
Joe Powder, the powder coating expert featured in the monthly “Ask Joe Powder” section of Metal Finishing magazine, will now be available to answer reader inquiries online at Metal Finishing’s dedicated organic finishing website. 14 October 2009
The AESF Foundation announces the last call for its Electroplating and Surface Finishing Course, scheduled to take place Oct. 26–29 at the Holiday Inn Express at 901 Jefferson Blvd. in Warwick, R.I. The deadline for registration is Monday, Oct. 19. 14 October 2009
Representatives from Elsyca, a Leuven, Belguim-based company specializing in numerical modelling technology to predict and optimize electrochemical processes such as electroplating, plans to hold a Lecture Series on “Transport Phenomena in Electrochemical Processes” at the world renown von Karman Institute in Belgium from Nov. 30–Dec. 4, 2009. 14 October 2009
Jeff Grodecki, technical support manager for Columbia Chemical, becomes the latest addition to the “Ask the Experts” roster on metalfinishing.com. Grodecki will field questions related to the categories of zinc and zinc alloy plating. 01 October 2009
ITW Gema and Alliance Surface Finishing, Inc., recently reached an agreement on a strategic global partnership to promote a new Alliance Surface Finishing-patented technology known as the Dual Coat System, or DCS. This new technology enables manufacturers to apply two different powder coat films within the same powder booth and then co-cure. 01 October 2009
AkzoNobel adjusts Performance Coatings and Specialty Chemicals portfolios as part of a realignment that will see the launch of two new business units and the merger of two others. 17 September 2009
MetoKote Corporation, an industry leader in protective coating applications—including electrocoat, powder coating and liquid paint—has awarded PPG Industries its inaugural Supplier of the Year 2009 Award. 09 September 2009
Metal Finishing magazine, the plating and coating industries’ technology magazine, is making it easier for finishers to connect with potential customers. Metal Finishing recently took the wraps off the new Finishers’ Directory, part of the newly revamped metalfinishing.com website. 02 September 2009
The Powder Coating Institute, or PCI, and NACE International, The Corrosion Society, or NACE, will be partnering to produce The North American Industrial Coating Show to be held at the Indianapolis Convention Center, Oct. 27-29, 2010. 26 August 2009
The AESF Foundation has released the schedule for its Fall 2009 courses. Topics range from environmental issues to precious metal plating techniques. 26 August 2009
DuPont Powder Coatings recently launched a new website designed to give customers quick and easy access to information about its powder coatings brands and products. The easy-to-navigate design presents a bright and inviting appearance and includes comprehensive product, color and technical information as well as a digital color card showing the 400-plus RAL and standard colors and surface effects in stock and ready to ship same day. 26 August 2009
DuPont Automotive OEM Coatings has been named a GM Supplier of the Year for 2008. The honor, DuPont Automotive’s second in as many years, is in recognition of DuPont’s performance as a global provider of finishes. 20 August 2009
Metal Finishing continues its online webinar series with a presentation on the “Forensic Analysis of Coating Failures.” The webinar will be moderated by Ron Joseph, Metal Finishing's organic editor, and a full-time paint and coatings consultant. 20 August 2009
The Society of Vacuum Coaters, SVC, plans to hold its inaugural Topical Conference—also known as TopCon—on Nov. 3-5, 2009, at the Albuquerque Marriott, in Albuquerque, N.M. 20 August 2009
Haviland Products, which formulates, manufactures and distributes decorative, functional and specialty coatings for Fortune 500 companies nationwide, announced the acquisition of Wyandotte, Mich.-based Benchmark, Inc., a leader in the formulation and manufacturing of surface finishing chemistry since 1956. 06 August 2009
Reliable Silver, Inc., which has been fabricating metals products for industrial and decorative applications for more than 30 years, has rolled out a new pricing program governing its line of precious metals for plating. The program, which entails a value-added, customized pricing/service strategy anchored by a newly redesigned website, is designed to help finishers lower their costs and boost productivity in these challenging economic times. 09 July 2009
Optimum Anode Technologies, a newly formed business affiliate of Titan Metal Fabricators, has hit the ground running with a full complement of dimensionally stable anode coatings designed to meet or exceed the technical and operational needs of customers in a number of industries, including biotechnology, cathodic protection, chemical process, electronics, metal finishing, water and wastewater treatment, and specialty applications. 16 April 2009
Hong Kong-based Process Automation International Ltd. (PAL), which supplies technologies and expertise in a variety of plating methods, has entered into a partnership with Elsyca, a Leuven, Belgium-based supplier of plating feasibility and tooling solutions. The goal, the parties said, is to provide a one-stop source for electroplating optimization solutions. 25 March 2009
Earlier this month Atotech celebrated the grand opening of its new North American TechCenter for corrosion protection applications. The event, held at the Crowne Plaza Hotel in Niagara Falls, included a customer seminar on new trends and technologies for electrolytic corrosion protection, zinc flake coatings for automotive fasteners, and Atotech’s involvement in sustainable development. 12 September 2008
Sirius Technology, Inc., and Taskem, Inc., announced that the two companies have merged. The deal, effective April 1, 2008, will result in a new company to be called Coventya, Inc. 28 March 2008
Email Address
Password
Forgotten login?