- 16 May 2008 -
Technical Conference Track II Highlights Surface Preparation
Track II of the SUR/FIN 2008 Technical Conference, which takes place at 2 p.m.–5 p.m. on Monday, June 16, at the Indiana Convention Center, focuses on “Surface Preparation & Treatment.”...more
- 16 May 2008 -
Last Call to Reserve Your Seat for the J.D. Power & Associates Featured Presentation
With SUR/FIN 2008 right around the corner, tremendous excitement is building for the Automotive Symposium featured speaker, Dr. Bob Schnorbus, chief economist and director of macroeconomics at J.D. Power & Associates. However, seating for this event is limited. Therefore, it is highly recommended that attendees reserve their seats ahead of time for this rare special event, which kicks off at 9 a.m. on Tuesday, June 17, at the Indiana Convention Center....more
- 16 May 2008 -
Proven Tips on Navigating SUR/FIN
With so much to see and do at SUR/FIN 2008, attendees are being advised to make their SUR/FIN “shopping plans” well in advance of the event. The following proven tips show you how....more
- 09 May 2008 -
Technical Conference Kicks Off With Timely Seminars on Electroless Deposition
The highly touted Technical Conference at SUR/FIN 2008, which takes place at the Indiana Convention Center in Indianapolis next month, lifts off on Monday, June 16, with a program dedicated to innovations in electroless nickel....more
- 09 May 2008 -
SUR/FIN Certified Training Course Deadline Approaching
May 29 is the last day to register for the AESF Foundation–certified training courses at SUR/FIN, which takes place June 16–19 at the Indiana Convention Center in Indianapolis....more
- 09 May 2008 -
Register Early for SUR/FIN and Save $$$$!
Early registration for SUR/FIN 2008 ends on Thursday, May 15. After this date, registration fees increase for the conference programs. Don’t delay—register online today!...more
- 02 May 2008 -
PCI Names New Executive Director
The Powder Coating Institute (PCI) has named Steve Houston its new executive director, effective May 1. Houston, who most recently served as global marketing director for DuPont’s Industrial Coatings business, replaces Greg Bocchi, who resigned from PCI on Feb. 20 to accept the executive director position with the Vinyl Institute....more
- 02 May 2008 -
Countdown to SUR/FIN: NASF Previews 2008 Automotive Symposium Lineup
The value-packed conference program will feature informative technical sessions, an automotive market trends forecast, plus an appearance by J.D. Power & Associates' chief economist....more
- 02 May 2008 -
Metalformers Expect Business Conditions to Weaken Over
Short Term
Metalforming companies expect business conditions to weaken during the next three months. This news comes from the April 2008 Precision Metalforming Association (PMA) Business Conditions Report, released earlier this week....more
- 25 April 2008 -
Nordson Corp. Signs Distribution Agreement with Sensory Analytics
Nordson Corp., Westlake, Ohio, earlier this week announced that it has signed a license and distribution agreement with Greensboro, N.C.–based Sensory Analytics, a leading developer of innovative coating measurement systems. The distribution agreement enables the exclusive use of certain Sensory Analytics SpecMetrix coating measurement technologies within new Nordson coating measurement offerings for container manufacturers....more
- 25 April 2008 -
Ian Sellars, Managing Director of Elcometer, Passes
Ian Sellars, the owner and managing director of Elcometer, and one of the founders of the modern coating inspection industry, passed away last week. He was 70....more
- 25 April 2008 -
Chemical, Paint Suppliers Report First-Quarter Earnings
DuPont, Rohm & Haas, Co., Sherwin Williams, and PPG were among the market leaders reporting first-quarter earnings....more
- 18 April 2008 -
U.S. Industrial Production Inches Up in March
A newly released report from the Federal Reserve showed U.S. industrial production rose 0.3% in March, despite projections forecasting a decline....more
- 18 April 2008 -
IPC Urges California Members to Act on Chemicals Initiative
The Association Connecting Electronics Industries (IPC) is urging its California members to contact the California Department of Toxic Substances (DTSC) regarding the state’s Green Chemistry Initiative. Through its “Green Chemistry Initiative” the DTSC plans to establish a new framework for chemicals management, which would have major adverse implications for all types of industries, including the electronics industry....more
- 18 April 2008 -
Finishers Test Market at SAE Automotive World Congress
Major parts and materials suppliers to the automotive industry—as well as a handful of platers and coaters—were on hand at this week’s SAE Automotive World Congress in Detroit, Mich. Finishers on hand—several of which attended the show for the first time—came to get a lead on how Tier 1 and Tier 2 players are influencing finishing specifications for their OEM partners and automotive manufacturer customers....more
- 11 April 2008 -
Continental Airlines Receives EPA Award for Use of Non-Toxic Pretreatment in Aircraft Painting Process
Continental Airlines, the industry's fifth-largest carrier, has received an award from the U.S. Environmental Protection Agency's (EPA) Design for the Environment (DfE) Program. The honor is in recognition of the airline's use of PreKote, an environmentally friendly, non-chromium surface pretreatment for its aircraft. Continental is the first commercial air carrier to use this technology—which is produced by Pantheon Chemical—on its aircraft....more
- 11 April 2008 -
Exhibitors 'Wired' at '08 IPC Printed Circuits Expo
From the opening awards ceremony to the bustling show floor, attendees and exhibitors alike had high marks for the recent IPC Printed Circuits Expo, APEX, and the Designers Summit, held April 1–3 at the Mandalay Bay Resort & Convention Center in Las Vegas. In fact, according to event organizers, the show exceeded many exhibitors' expectations....more
- 11 April 2008 -
Michigan Industrial Jobs Fall by 5.3% Over Past 12 Months
Industrial employment in Michigan dropped 5.3% over the past 12 months, according to the 2008 Michigan Manufacturers Directory, an industrial directory published annually by Manufacturers' News, Inc., (MNI) of Evanston, Ill. MNI reports Michigan lost 43,087 industrial jobs in 2007-the largest 12-month job loss MNI has reported for any state over the past two years....more
- 04 April 2008 -
Top Automakers Report Sales Slump in March
First-quarter automotive sales continued on their downward curve as several of the industry’s largest manufacturers reported a slump in sales....more
- 04 April 2008 -
SERFILCO Announces U.K. Trade Tour
SERFILCO, Ltd., manufacturer and marketer of a broad line of corrosion-resistant pumps, agitators, filtration systems, and instruments, has announced plans to conduct a trade tour in the United Kingdom this fall. The tour, which is slated for Oct. 7–10, 2008, will entail visits to aerospace facilities utilizing SERFILCO’s products and technologies....more
- 04 April 2008 -
IPC 2008: Day One Report From Las Vegas
Industry luminaries and noted authors received special recognition on day one of the IPC Printed Circuits Expo/APEX/Designers Summit, which kicked off in Las Vegas on March 29....more
- 28 March 2008 -
J.D. Power & Associates Chief Economist Named Featured Speaker for SUR/FIN 2008 Automotive Symposium
Dr. Bob Schnorbus, chief economist and director of macroeconomics at J.D. Power & Associates, has been tapped to discuss the current state of market as well as future global trends at the Automotive Symposium at SUR/FIN 2008, which takes place June 16–18 at the Indiana Convention Center in Indianapolis, Ind. During his 90-minute presentation, which jumpstarts the day’s programming on Tuesday, June 17, Dr. Schnorbus will address a host of timely and pertinent issues of critical importance to virtually all channels serving the automotive industry....more
- 28 March 2008 -
Sirius Technology and Taskem Announce Merger
Sirius Technology, Inc., and Taskem, Inc., are proud to announce that the two companies have merged, effective April 1, 2008. The combined company, which will be called Coventya, Inc., creates the fourth-largest general metal finishing supplier in North America....more
- 28 March 2008 -
U.S. Patent Assigned to ViaForm Leveler Copper Damascene Electroplating Chemistry
Enthone, Inc., a business of Cookson Electronics, has been assigned United States Patent No. 7,316,772 for its ViaForm Leveler copper damascene electroplating chemistry....more
- 21 March 2008 -
Deadline Approaching for 2008 Washington Forum
Hotel Registration
Monday, March 31, is the cut-off date for hotel registration for the the 2008 Washington Forum. The annual event is scheduled to take place April 22–24 at the L'Enfant Plaza Hotel in Washington, D.C....more
- 21 March 2008 -
NASF Finalizes Washington Forum Schedule
The National Association for Surface Finishing (NASF) has announced the final schedule for the Washington Forum, which will take place April 22–24 in Washington, D.C....more
- 21 March 2008 -
Metalformers Look for ‘Steady Business’ Over Short Term
Metalforming companies expect business conditions to remain steady during the next three months. This outlook is based on the newly released Precision Metalforming Association (PMA) Business Conditions Report....more
- 21 March 2008 -
U.S. Industrial Production Falls in February
Industrial production dropped 0.5% in February, the sharpest decline in four months. This according to a newly released Federal Reserve report....more
- 14 March 2008 -
Greg Bocchi, PCI Executive Director, Announces Resignation
After more than 24 years of dedicated service to The Powder Coating Institute (PCI) and the coatings industry, Greg Bocchi has announced his resignation from the position of executive director, effective April 30....more
- 14 March 2008 -
GM to Sponsor SME’s Brightest Young Minds Mentor Initiative
The Society of Manufacturing Engineers (SME) announced that General Motors will sponsor its fifth annual Bright Minds Mentor Program. As a part of the program, 50 Orlando School Districts' high school students will participate in the customized program while attending the SME RAPID 2008 Conference & Exposition at Disney's Coronado Springs Resort on May 21, 2008....more
- 14 March 2008 -
COATING 2008 Set for Indianapolis in September
The industry's leading experts, suppliers, and trade associations invite participants to start making their plans to attend COATING 2008, which takes place Sept. 22–25, 2008, at the Indiana Convention Center in downtown Indianapolis, Ind. The event is being billed as the place to learn about leading-edge technology and ways to improve your finishing operations....more
- 14 March 2008 -
‘California Showcase Week’ a Hit!
The Metal Finishers Association of Southern California (MFASC) Supplier Showcase and STA Vendor Showcase drew hundreds of visitors during “California Showcase Week,” which took place Tuesday, Feb. 19., and Thursday, Feb. 21, in Montebello and San Jose, respectively....more
- 7 March 2008 -
Blair Vandivier Honored at Annual NASF Management Conference
Blair Vandivier, president of Benchmark Products and Seleco, Inc. (Indianapolis, Ind.), received the 2007 Silvio C. Taormina Memorial Award at the National Association for Surface Finishing's Annual Management Conference in Cabo San Lucas, Mexico. The honor is NASF's most prestigious individual award....more
- 7 March 2008 -
2007 Surface Finishing Industry Report Unveiled
The National Association for Surface Finishing (NASF) has announced the release of the 2007 Surface Finishing Market Research Board (SFMRB) Industry Market Survey. The highly anticipated report-which focuses on NAFTA market trends-includes data from the world's major metal finishing chemical suppliers and the largest North American job-shop platers....more
- 7 March 2008 -
Columbia Chemical Corp. Moves Into New Facility
Columbia Chemical Corp. has moved into its new headquarters, located at 1000 Western Drive, Brunswick, Ohio. Construction on the $4 million building project began this past August on a four-acre land parcel, and it is in the same industrial park where Columbia has resided for 16 years....more
- 7 March 2008 -
February '08 Auto Sales Hit the Skids
Auto sales dipped for another straight month as General Motors, Ford Motor Co., Chrysler, and Toyota Corp. reported lower revenues in February. As a result, manufacturers are cutting their second-quarter production forecasts....more
- 7 March 2008 -
Schaffner Scores Second MASTAR Award in Three Years
Schaffner Manufacturing Company, a producer of custom metal finishing products, has been named a winner of Masco Corporation's 2007 MASTAR Awards. The Masco Supplier Team Recognition Program acknowledges suppliers' outstanding product quality, on-time delivery, clear communication, effective follow-up, and competitive pricing....more
- 29 February 2008 -
Keynote Speaker Tapped for Washington Forum
The National Association for Surface Finishing (NASF) has named Fred Barnes, political commentator and co-founder and executive editor of The Weekly Standard, the keynote speaker for the Washington Forum, April 22−24. Barnes is set to deliver his speech on Wednesday, April 23, during a special luncheon at the L’Enfant Plaza Hotel....more
- 29 February 2008 -
Registration Now Open for 2008 SMF Conference
Southern Metal Finishing, an annual metal finishing conference held each year in historic Charleston, S.C., has announced that registration is now open for its Sept. 14–16, 2008, conference and tradeshow. This year’s conference will be held at the majestic Francis Marion Hotel....more
- 29 February 2008 -
Countdown to SUR/FIN ’08: A Bigger, Better Exhibition
Larger booths, modern equipment and machinery, demonstrations of new product innovations, and more exhibits overall. SUR/FIN 2008 attendees can expect to experience these elements and so much more when the doors to North America’s premier surface finishing event burst wide open June 16–18 at the Indiana Convention Center in Indianapolis....more
- 29 February 2008 -
IPC to Sponsor Upcoming Endicott Technology Interchange
On May 14, 2008, Endicott Interconnect Technologies, Inc. (EI), a world-class supplier of electronic interconnect solutions and electro/mechanical equipment, will hold a special educational event at its headquarters in Endicott, N.Y. The event, which is being billed as a "day of information exchange and networking," is sponsored by IPC, the Association Connecting Electronic Industries....more
- 22 February 2008 -
Enthone Celebrates Opening of Advanced Applications Laboratory
Enthone Inc., a business of Cookson Electronics, earlier this week celebrated the grand opening of its advanced plating applications laboratory located at the company’s West Haven, Conn., facility. More than 150 guests—including customers, state and local government officials, media, and company employees—attended the event....more
- 22 February 2008 -
U.S. Industrial Production Inches Up in January
Industrial production in the U.S. rose 0.1% in January, according to a recently released report by the Federal Reserve....more
- 22 February 2008 -
Metalformers Expect Rebound in Short Term
Metalforming companies expect shipping levels to rebound from the significantly low levels reported in January. That is according to the newly released February 2008 Precision Metalforming Association (PMA) Business Conditions Report....more
- 22 February 2008 -
IPC 2008 Update: Environmental Issues to Dominate Discussions
With environmental regulations impacting the electronic interconnect industry from all corners of the world, IPC—the Association Connecting Electronics Industries—announces a number of environment, health, and safety (EHS) activities that will be held at the IPC Printed Circuits Expo March 31–April 3, 2008. The purpose is to inform industry executives of impending restrictions in printed board manufacturing and electronics assembly....more
- 15 February 2008 -
NPCA, FSCT Agree to Merge
The National Paint & Coatings Association (NPCA) and the Federation of Societies for Coatings Technology (FSCT) recently signed a Memorandum of Agreement that essentially consolidates the governance, management and administrative functions of both groups under NPCA, while preserving each organization’s separate identities, operations, functions, and member services. As part of the merger, FSCT and NPCA have agreed to combine the International Coatings Expo (ICE) with the American Coatings Show and Conference (ACS) to be held on June 2–5, 2008, in Charlotte, N.C...more
- 15 February 2008 -
Zinc, Copper Prices Tumble in Mid-Week Trading; Aluminum and Tin See Spikes
Copper and zinc led declines in trading earlier this week on the London Metal Exchange (LME), falling to $7,770 and $2,415 per ton, respectively. Meanwhile, aluminium ($2,691) and tin ($17,200) rallied. ...more
- 15 February 2008 -
GM Suffers Biggest Loss in 2007; Industry at Large Posts Tepid January '08 Sales
Earlier this week General Motors (GM) reported a loss of $38.7 billion in 2007, its biggest annual drop. Company principals cite a write-down in tax credits in the third quarter that were expected to expire unused. As a result, the company announced plans to offer voluntary buyouts to all 74,000 members of its union-represented U.S. workforce...more
- 15 February 2008 -
LEAN Manufacturing Conference Slated for March
On March 12–13, the Society of Manufacturing Engineers (SME) will kick off “Lean for the Supply Chain,” a conference designed to bring together OEMs, major suppliers and job-shop owners to address the value of using lean processes to collaborate on working effectively across the supply chain. The event will take place at the Crowne Plaza Hotel in San Jose, Calif...more
- 08 February 2008 -
OSHA Issues Enforcement Procedures Directive for Hex-Chrome Standards
The Occupational Safety and Health Administration (OSHA) has issued a new compliance directive for occupational exposure to hexavalent chromium, thereby providing valuable guidance to help finishing shop owners protect workers...more
- 08 February 2008 -
Defense Department Sets Target to Cut ‘Emerging Contaminants’ Risks
The Department of Defense (DOD) has developed a plan to lower exposure levels of so-called high-risk emerging contaminants (ECs) that, if left unabated, could carry significant environmental liability consequences for the military. The goal is to cut these risks within seven years...more
- 08 February 2008 -
Outlook Favorable for Airline/Aerospace Industry
After a brief period of stagnation in the commercial airline industry, there are very encouraging signs pointing to a positive outlook on the sector. That’s according to an industry business report featured in the February issue of Metal Finishing...more
- 08 February 2008 -
Countdown to SUR/FIN: Call for Booth Descriptions, Product Press Releases
Metal Finishing magazine, in conjunction with the National Association for Surface Finishing (NASF), is in the process of compiling booth descriptions and other exhibitor details for the official SUR/FIN 2008 Show Guide & Directory. For inclusion in this special edition, which will receive mass distribution at the show, please click here to submit your free SUR/FIN booth details...more
- 01 February 2008 -
ASM/NASF Conference Takes Flight
Emerging technology development and application in the field of surface finishing for commercial and military aircraft applications was the main theme of the inaugural Surface Engineering for Aerospace and Defense Conference, held Jan. 21–22 at the Coronado Springs Hotel in Walt Disney World, Orlando, Fla. Scores of experts serving the aerospace and defense industries attended the two-day educational and networking event, which was co-sponsored by ASM International (The Materials Information Society) and the National Association for Surface Finishing (NASF)...more
- 01 February 2008 -
Countdown to SUR/FIN: Exhibitors Psyched About Indy in June
SUR/FIN 2008, set to kick off at the Indiana Convention Center June 16–18, may be several months away, but by no means is it on the backburner for confirmed exhibitors. A Metal Finishing vendor poll shows they are more than a little excited about the upcoming conference...more
- 01 February 2008 -
Powder Coating Educational Tour Set for 2008
The International Surface Finishing Academy (ISFA) has announced the dates and locations of its Powder Coating Courses for 2008. The courses, instructed by the powder coating experts of TIGER Drylac USA, cover the fundamentals of powder coating from both commercial and industrial perspectives...more
- 01 February 2008 -
BASF Coatings Unveils 2008 Color Trend Forecast
The worlds of color reflect a sustainable symbiosis of nature and technology. That’s according to designers at BASF Coatings, which recently unveiled its annual Color Trend Forecast for the automotive industry. The report aims to keep both finishers and refinishers abreast of global changes in end-user preferences for colors and shades...more
- 25 January 2008 -
Metalformers Expect Steady Conditions Over Short Term
Metalforming companies expect business conditions to remain steady over the next three months despite low current shipping levels. That’s according to the January 2008 Precision Metalforming Association (PMA) Business Conditions Report...more
- 25 January 2008 -
DOD Metal Finishing Workshop Slated for Feb. 26-28
The Department of Defense (DOD) and the surface finishing industry will continue its cooperative technology information exchange on metal finishing applications at a conference to be held Feb. 26-28, 2008, at the Fiesta Resort and Conference Center in Tempe, Ariz...more
- 25 January 2008 -
Metal Finishing Appoints New Managing Editor
Metal Finishing magazine is pleased to announce the appointment of Drew Amorosi as its new managing editor, effective Jan. 15, 2008. He takes over the position previously held by Patti Ann Frost, who left the magazine last fall...more
- 25 January 2008 -
METALAST Introduces Product Compliance Program
METALAST has announced the introduction of a no-cost Product Compliance and Quality Assurance Program in an effort to assist manufacturers in confirming the implementation of product specifications throughout their supply chain. This new service now offered by the company includes all METALAST products that have been specified by manufacturers...more
- 16 January 2008 -
U.S. Industrial Production Beats Forecasts
FA newly released report from the Federal Reserve showed industrial production in the U.S. grew by 0.3% in December—trumping initial forecasts calling for a decline. That was due largely to growth in exports and healthy consumer spending, which helped make up for weakness in auto and housing-related industries...more
- 16 January 2008 -
Regulatory Alert: Facility Top-Screens Due Jan. 22nd
All facilities that possess chemicals listed in the rule’s revised Appendix A at or above the applicable STQ must submit a Chemical Security Assessment Tool (CSAT) Top-Screen by January 22, 2008. The Top-Screen is an online tool, through which a facility, by answering a series of questions, will allow DHS to preliminarily determine if the facility presents a high level of security risk...more
- 16 January 2008 -
Enthone Expands Operations in East of Europe; Opens New Companies in Romania and Slovakia
Enthone, Inc., a business of Cookson Electronics, has announced the continued expansion of the company’s operations throughout the East of Europe region with the opening of newly formed companies in Romania (Enthone S.R.L.) and Slovakia (Enthone s.r.o.)...more
- 16 January 2008 -
SFCHINA '07 Event Tops Year-Over-Year Turnout
Nearly 12,000 visitors descended on the Shanghai New International Expo Center Nov. 21-23 for SFCHINA 2007, the country’s premier surface finishing convention and exhibition. The turnout reflected a 3.4% increase of the last year’s event, including a jump in overseas visitors...more
- 07 January 2008 -
American Plating Power Joins Roster of ‘Experts’ on Metalfinishing.com
Finishers and shop owners seeking answers to power-related questions have a new resource to tap. Fort Myers, Fla.-based American Plating Power has joined the roster of “Ask the Experts” at www.metalfinishing.com...more
- 07 January 2008 -
Metal Finishing Organic Guidebook Now Available Online!
The most comprehensive reference source for painters and powder coaters is now literally available at the “click” of a mouse. Metal Finishing is pleased to announce the launch of its first-ever digital edition of the 2008 Organic Finishing Guidebook & Directory!...more
- 07 January 2008 -
Kushner Electroplating to Kick off Spring Training Program
The Kushner Electroplating School has announced the Spring 2008 schedule for its two-day electroplating training program. The schedule kicks off in Greenville, S.C., March 31 and April 1, 2008, and resumes in Cincinnati, Ohio, April 3-4...more
- 07 January 2008 -
SUR/FIN Deadline for Technical Papers Extended!
If you missed the Jan. 4 deadline to submit technical papers for SUR/FIN 2008, fear not. The National Association for Surface Finishing (NASF), which manages the show, has extended the deadline to Jan. 21...more
- 20 December 2007 -
Don’t Miss Out on NASF/ASM Joint Conference!
The NASF/ASM Joint Conference on Surface Engineering for Aerospace and Defense, set for Jan. 21-22 in Orlando, Fla., is fast approaching. Don’t miss out on this two-day, information-packed meeting!...more
- 20 December 2007 -
Metalformers Early ’08 Outlook is Positive
Metalforming companies have a more positive outlook as they look ahead to the beginning of 2008; that’s according to the recently released Precision Metalforming Association (PMA) Business Conditions Report...more
- 20 December 2007 -
U.S. Industrial Output Inches Upward in November
U.S. industrial production inched up by 0.3% in November to post a larger-than-expected increase. That’s according to the findings of a newly released report from the Federal Reserve...more
- 14 December 2007 -
Countdown to SUR/FIN: Finishing Exhibitors Wanted!
If you were among the history-making finishers that exhibited for the first time at SUR/FIN 2007, the National Association for Surface Finishing (NASF) has a message for you: “We want you back for SUR/FIN 2008!”...more
- 14 December 2007 -
Countdown to SUR/FIN: Last Call for Technical Papers!
The January 4 deadline is fast approaching for technical paper submissions for SUR/FIN 2008, North America’s premier convention and conference for the surface finishing industry...more
- 14 December 2007 -
Rohm & Haas Award Recognizes Outstanding Female Leaders
Rohm and Haas Co., earlier this week awarded Cathie Markham with the first-ever Phoebe Waterman Haas Award, an honor presented to women within the company who exemplify the characteristics of outstanding leadership; serve as a role model in developing and mentoring employees; and whose impact extends beyond their function and into the community...more
- 14 December 2007 -
Xiom Corp. Launches Latin American Marketing Campaign
Xiom Corp., developers and manufacturers of the first completely portable polymer powder coating spray system, has launched a marketing campaign to increase awareness of the company in Latin America...more
- 14 December 2007 -
Col-Met Donates to a Worthy Cause
On Dec. 10, Col-Met Spray Booths presented a $10,000 donation check from fundraising activity to The Wounded Warrior Project (www.woundedwarriorproject.org), a non-profit organization that assists service men and women who have been severely injured during the conflicts in Iraq, Afghanistan, and other places around the world...more
- 07 December 2007 -
OSHA Renews Deal With Metalforming Association
The Occupational Safety and Health Administration (OSHA) has renewed its alliance with the Precision Metalforming Association (PMA), originally signed on November 17, 2005, to continue to provide its members and others with guidance, information and access to training to help protect the health and safety of employees in the metalforming industry...more
- 07 December 2007 -
Henkel, DuPont Collaborate on Distribution Deal
Henkel has announced a collaboration with DuPont to distribute DuPont's CorMax(R) electrocoat to the North American automotive parts supplier industry. This alliance expands Henkel's product offerings, providing customers a strong option for e-coat technology, the parties said...more
- 07 December 2007 -
Coating Developers, Engineers Honored at ASM Award Ceremony
Several prominent engineers and scientists were recently honored at ASM International’s annual award ceremony in Detroit, Mich. Many of the recipients were recognized for their innovations in materials engineering and surface coating technologies...more
- 07 December 2007 -
Metal Finishing Expands 'Ask the Expert' Roster with Organic Category
DUX Area, manufacturer of air guns featuring the patented Advanced Laminar Airflow Technology, becomes the latest addition to the “Ask The Expert” department at www.metalfinishing.com...more
- 30 November 2007 -
NASF/ASM Joint Aerospace Conference Set to Lift Off in January
The National Association for Surface Finishing (NASF) will join forces with ASM International in sponsoring the 2008 Conference on Surface Engineering for Aerospace and Defense. The event is scheduled to take place Jan. 21-22 at the Coronado Springs Hotel (Walt Disney World) in Orlando, Fla...more
- 30 November 2007 -
Countdown to SUR/FIN ’08: Booth Space Going Fast
If you’re still making plans to exhibit at SUR/FIN 2008 in Indianapolis, Ind., you’ll need to move fast. According to the National Association for Surface Finishing (NASF), which manages the show, booth space is already 75% sold out...more
- 30 November 2007 -
Rohm & Haas Announces Price Increases on Select Monomers
Rohm and Haas’ Primary Materials business has announced price increases for select monomers—key ingredients in a variety of coatings, paints, plastics, inks and oil additives...more
- 30 November 2007 -
SSPC Authorized as Continuing Education Provider
The Society for Protective Coatings (SSPC) is pleased to announce that the Florida Board of Professional Engineers (FBPE) has approved the authorization of SSPC as a continuing education provider. This means that FBPE will now award continuing education units (CEU's) to professional engineers in Florida who pass "area of practice" courses offered by SSPC...more
- 21 November 2007 -
NASF Announces 2008 Board of Directors
More than 650 ballots were cast, and now the results of the election for the National Association for Surface Finishing board of directors are in!...more
- 21 November 2007 -
DUX Area Joins 'Ask the Expert' Roster
DUX Area, manufacturer of air guns featuring the patented Advanced Laminar Airflow Technology, becomes the latest addition to the “Ask The Expert” department on metalfinishing.com...more
- 21 November 2007 -
U.S. Industrial Production Dips 0/5% in October
U.S. industrial production fell for the first time in five months and experienced its largest decline since January of this year, according to a newly released Federal Reserve report...more
- 21 November 2007 -
Metalformers Expect Steep Business Decline in Short Term
Metalforming companies expect a significant decline in business conditions during the next three months. That’s according to the November 2007 Precision Metalforming Association (PMA) Business Conditions Report, released earlier this week...more
-12 November 2007 -
Sponsors Sought For Bright Design Challenge
The National Association for Surface Finishing (NASF) is seeking sponsors for the Bright Design Challenge Contest (BDC). This innovative program is a cooperative college scholarship contest created to help educate future automotive and transportation designers and stylists about the benefits and flexibility of surface finishing...more
-12 November 2007 -
Department of Homeland Security Releases Appendix 'A'List of Chemicals
The Department of Homeland Security (DHS) last week released its much-awaited “Appendix A” list of chemicals to be regulated under the new Chemical Facility Anti-Terrorism Standards (CFATS)...more
-12 November 2007 -
Metal Finishing Managing Editor Resigns
Patti Ann Frost, Metal Finishing’s managing editor, has resigned from the company, effective Oct. 31. Frost, a 34-year employee with the magazine, recently relocated to Newbern, N.C....more
-12 November 2007 -
Call for Papers Alert!
Metal Finishing is currently seeking technical papers for publication in the magazine. Topics and themes run the gamut from electroplating technologies and advancements to the latest innovations in organic finishing...more
-12 November 2007 -
Sponsors Sought For Bright Design Challenge
The National Association for Surface Finishing (NASF) is seeking sponsors for the Bright Design Challenge Contest (BDC). This innovative program is a cooperative college scholarship contest created to help educate future automotive and transportation designers and stylists about the benefits and flexibility of surface finishing...more
-12 November 2007 -
Department of Homeland Security Releases Appendix “A” List of Chemicals
The Department of Homeland Security (DHS) last week released its much-awaited “Appendix A” list of chemicals to be regulated under the new Chemical Facility Anti-Terrorism Standards (CFATS)...more
-12 November 2007 -
Metal Finishing Managing Editor Resigns
Patti Ann Frost, Metal Finishing’s managing editor, has resigned from the company, effective Oct. 31. Frost, a 34-year employee with the magazine, recently relocated to Newbern, N.C....more
-12 November 2007 -
Call for Papers Alert!
Metal Finishing is currently seeking technical papers for publication in the magazine. Topics and themes run the gamut from electroplating technologies and advancements to the latest innovations in organic finishing...more
- 02 November 2007 -
Last Chance to Register for LA Powder Coating Class
The last leg of the four-city “Powder Coating Academy 2007” kicks off Nov.7-8, in Los Angeles, Calif. The organic-finishing classes are co-sponsored by Metal Finishing magazine and Finishingmarket.com, and taught by the powder coating experts at Tiger Drylac USA...more
- 02 November 2007 -
“Spray Gun Technology Webinar” Now Archived on MetalFinishing.com
If you missed the debut of Metal Finishing’s first webinar on “Green Spray Gun Technology,” featuring DUX Area, fear not. The entire one-hour educational program, which originally launched on Oct. 18, has been archived under the “webinar” tab and metalfinishing.com…more
- 02 November 2007 -
European Governing Body Seeks List of Banned Chemicals under Reach
The International Chemical Secretariat (ChemSec), a nonprofit organization that describes its mission as "working towards a toxic-free environment,” intends to develop a list of chemicals it says should be phased out of use in the European Union (EU)…more
- 02 November 2007 -
Countdown to SUR/FIN ’08: NASF Wants Your Technical Papers!
The National Association for Surface Finishing (NASF) is calling on past SUR/FIN presenters, chemists, engineers, and finishing experts from around the globe to participate in the Technical Conference at SUR/FIN 2008. The event, which is being billed as the only global forum to embrace the entire supply chain of finishers, OEMs and suppliers, will be held June 16–18 in the Indiana Convention Center in Indianapolis. Abstract submissions are due by January 4, 2008…more
- 25 October 2007 -
Rohm & Haas Seeks Price Increases
Rohm and Haas Company earlier this week announced it is seeking price increases for most of its chemical products, effective Nov. 1, 2007. Increases will range from 5%-15%...more
- 25 October 2007 -
Former Massachusetts Finishing Shop Owner Indicted in Illegal Dumping Case
The former president of Pacetti Corporation, a North Reading, Mass.-based metal finishing firm, has been indicted on charges that he left barrels of hazardous waste in the woods in Massachusetts...more
- 25 October 2007 -
Chemical Suppliers, Paint Producers Issues 3rd QTR Earnings
The third quarter of 2007 was mostly kind for several of the industry’s leading chemical suppliers and paint producers. Among the firms reporting: DuPont, PPG, Sherwin-Williams, and Rohm & Haas...more
- 19 October 2007 -
U.S. Industrial Production Inches Upward in September
U.S. industrial production rose 0.1% September, right in line with analysts’ expectations. The uptick, as reported by the Federal Reserve, reflects as a lift in manufacturing of business and high-technology equipment...more
- 19 October 2007 -
Enthone Introduces Novel Catalytic Inks; Acquires Worldwide Exclusive License from TECSEN SA
Enthone Inc., a business of Cookson Electronics, announces the expansion of its product portfolio with novel catalytic inks through a worldwide exclusive licensing agreement with TECSEN SA, Brussels, Belgium...more
- 19 October 2007 -
Nordson Unveils New Computer Modeling Tools
The Industrial Coating Systems business of Nordson Corporation has introduced nVision™ Tools, a series of interactive computer modeling tools designed to help global coaters in analyzing best available solutions for coating systems for liquid and powder lines...more
- 19 October 2007 -
Metalforming Firms Expect Near-Term Downturn
Metalforming companies expect a slight dip in business conditions during the next three months. That’s according to the newly released October 2007 Precision Metalforming Association (PMA) Business Conditions Report...more
- 11 October 2007 -
SMF Conference Serves Up Education
Dozens of knowledge-hungry shop owners, finishers, and managers descended on Charleston, S.C., late last month for the annual Southern Metal Finishing Conference, sponsored by the Southern Metal Finishing Newsletter. Highlights of this educational event included tabletop exhibits; a special keynote speech on the globalization of the metal finishing industry; a comprehensive, two-day course on cleaning technologies; and the resumption of the Powder Coating Four-City tour...more
- 11 October 2007 -
Rosler Announces Pair of Acquisitions
Rosler Metal Finishing USA, LLC announces two acquisitions: the ElectroHone polyester plastic media line from ElectroHone Technologies, Inc. and Reni Cirillo S.p.A., a global supplier of surface finishing equipment and consumables...more
- 11 October 2007 -
Countdown to SUR/FIN: Industry Revs up for Indy in ’08
With SUR/FIN 2007 still visible in the rear-view mirror, show organizers are already peering down the road to next year’s event, slated for June 16–18 in Indianapolis, Ind. Primarily, the National Association for Surface Finishing (NASF)—which manages the show—is seeking to carry over into next year the tremendous momentum generated during the event held this past summer...more
- 11 October 2007 -
‘Live from SUR/FIN’ Videos Now Available Online
Miss out on some of the highlights of SUR/FIN 2007? Or perhaps you would be interested in hearing and seeing important messages from several key principals of the National Association for Surface Finishing, regarding their thoughts of SUR/FIN 2007...more
- 05 October 2007 -
Metal Finishing Webinar Slated for October 18th
There’s still time to register for “Green Spray Technology Reduces Emissions and Increases Profitability for Surface Finishers,” Metal Finishing’s first webinar, held in conjunction with DUX Area and slated for Thursday, October 18, from 2 p.m. to 3 p.m. (EST)...more
- 05 October 2007 -
FIN-X 2007: All About Sharing Knowledge
Scores of technical sessions; upwards of 130 exhibitors on the show floor; and more-than-ample opportunities to network with peers and industry experts in the powder coating field. That’s what attendees were treated to at FIN-X ’07, which took place Sept. 17–20 in Indianapolis...more
- 05 October 2007 -
DuPont Deemed ‘Negligent’ in Waste-Site Lawsuit
In a class-action suite a civil jury in West Virginia has ruled that DuPont was negligent in creating a 112-acre waste site tainted with arsenic, cadmium and lead. The jury came to the conclusion based on the testimony of 10 West Virginians who argued the chemical maker should clean up the mess and perhaps compensate residents who now fear for their health...more
- 05 October 2007 -
Countdown to SUR/FIN 2008:
Call for Papers
Past SUR/FIN presenters, industry members, chemists, engineers, and metallurgists alike are invited to participate in the 2008 SUR/FIN Technical Conference, which will be held June 16-18 in the Indiana Convention Center, in Indianapolis. The deadline for abstracts in January 4, 2008...more
- 14 September 2007 -
Keynote Named for Southern Metal Finishing Conference
Southern Metal Finishing has named Michael Siegmund, executive vice president of MacDermid, Inc., the keynote speaker for the 2007 Conference in Charleston, S.C., Sept. 23-25. Siegmund’s presentation will deal with issues relevant to the globalization of the metal finishing industry, the effect of international competition on individual companies and job shops, and how finishing operations can compete in a changing world...more
- 14 September 2007 -
NASF Releases 2008 Events Schedule
The National Association for Surface Finishing (NASF) has published its 2008 schedule of events...more
- 14 September 2007 -
China, U.S. Reach Agreement on Paint Policy
Chinese and American trade officials and regulators earlier this week signed an agreement to ban the use of lead paint on toys exported to the United States. The agreement was the result of the second U.S.-China summit on consumer product safety held in Washington, shortly after toy giant Mattel recalled approximately 20 million Chinese-made toys bearing the toxic metal coating...more
- 14 September 2007 -
Professional Plating Kicks Off Expansion Project
Brillion, Wis.-based Professional Plating has begun a 42,000-square expansion of its 85,000-square-foot facility. The 28-year-old company—which offers rack zinc plating, barrel zinc plating, acrylic e-coating, epoxy e-coating, custom powder coating, and specialty ceramic coating services—is a Tier 1 supplier to Harley Davidson and the Buell Motorcycle Company...more
- 07 September 2007 -
IPC Report Shows Signs of Recovery in North American PCB Market
Rigid PCB shipments are down 7.1% and bookings are down 1.8% in July 2007 from July 2006. However, year-over-year numbers are improving. That’s according to newly released findings from the Association Connecting Electronic Industries’ (IPC) monthly North American Printed Circuit Board (PCB) Statistical Program...more
- 07 September 2007 -
Ford Motor Co. to Install Novel Paint Emissions Conversion System
Ford Motor Co. plans to install a patented Fumes-to-Fuel system at its Oakville, Ontario, assembly plant—an innovative system designed to convert emissions from its paint shop into electricity...more
- 07 September 2007 -
BASF Unveils Family of Chemical Solutions
BASF Electronic Materials plans to unveil a wide array of chemical solutions for use in copper process technologies for the semiconductor industry. The company will feature several innovations at SEMICON Taiwan 2007, which will be held from Sept. 12-14, 2007 at Taipei World Trade Center...more
- 07 September 2007 -
Former Chicago Finishing Firm Owner Faces Environment, Embezzlement Charges
The owner of a former metal finishing business was arrested earlier this month on federal environmental and labor embezzlement charges, law enforcement officials announced. The defendant, David Jacobs, was the president and owner of the former Northwestern Plating Works, Inc. (NPW), located at 3114 South Kolin, in Chicago...more
- 31 August 2007 -
Organic Coatings Expert to Host Four-Day Painting Seminar
Ron Joseph, the organic coatings editor of Metal Finishing magazine and a consultant with Exponent Failure Analysis Associates of Menlo Park, Calif., announces a four-day seminar focused on painting. The program, titled "Practical Methods for Improving Efficiency and Safety of Painting Operations,” takes place from Sept. 24 to 27 in Colorado Springs, Colo...more
- 31 August 2007 -
Metal Finishing to Launch First Interactive Webinar
Metal Finishing magazine, in conjunction with DUX Area, will launch its first “webinar,” a live, interactive online educational event scheduled for Thursday, October 18, at 2 p.m. EST...more
- 31 August 2007 -
Nordson Announces Acquisition; Releases 3rd QTR Financials
Westlake, Ohio-based Nordson Corp. has acquired TAH Industries, which makes chemical dispensers, for $45 million. TAH, based in Robbinsville, N.J., generated about $24.5 million in revenue and had operating margins of 17% for the 12 months ended July 2007, after adjusting for one-time costs...more
- 31 August 2007 -
Pair Indicted in Illegal Wasterwater Dumping Case in Minnesota
Two principals of Eco Finishing Co ., a Fridley, Minn.-based metal finishing company, were indicted in Federal Court earlier this week for allegedly dumping contaminated wastewater into the county sewer system...more
- 24 August 2007 -
SUR/FIN 2007 Opens to Rave Reviews
“Revitalized.” That’s the word so many people used to sum up SUR/FIN 2007, which kicked off in Cleveland, Ohio, last week, Aug. 16-19. Vendors and attendees alike reported brisk booth traffic, visitor enthusiasm, and an overall “high-energy” atmosphere at the show...more
- 24 August 2007 -
Finishing TV Debuts at SUR/FIN 2007
Finishing.TV, an IPTV (Internet Protocol Television) network providing television programs targeted directly toward the metal finishing industry, made its first official public appearance last week at SUR/FIN. Through an agreement with Metal Finishing Magazine, a division of Elsevier, Finishing.TV filmed interviews with participating vendors, and recorded several conference events at the show, which is managed by the National Association for Surface Finishing (NASF)...more
- 24 August 2007 -
PMA Report Predicts Improvement in Next QTR
Metalforming companies expect business conditions to improve slightly during the next three months. That’s according to the newly released August 2007 Precision Metalforming Association (PMA) Business Conditions Report...more
- 24 August 2007 -
U.S. Industrial Production Rises in July
A newly released Federal Reserve report showed U.S. industrial production rose 0.3% in July, as factory and mining output offset a cool-weather drop at utilities usage. This slighted exceeded analysts’ expectations of a 0.2% increase and represents an uptick of 1.4% year over year...more
- 24 August 2007 -
Metokote Corp. Adds Personnel
MetoKote Corporation, Inc., a leader in protective coating applications services, including electrocoating (e-coat), powder coating and liquid paint, has named a new vice president of engineering as well as a new manager for the John Deere & Co. business...more
- 07 August 2007 -
Enthone Breaks Ground for Applications Laboratory
Enthone Inc., a business of Cookson Electronics, has announced the construction of an advanced plating applications laboratory. Located at 350 Frontage Road, West Haven, Conn., the laboratory will be completely operational this September...more
- 07 August 2007 -
Technic Executive Pleads Guilty to Sabotaging Rohm & Haas Technology Test
A Technic, Inc. executive pleaded guilty on Wednesday August 1, to a conspiracy charge for trying to sabotage testing of an electroplating solution that rival Rohm & Haas Co. hoped to sell to Intel Corp...more
- 07 August 2007 -
PMA Chief Makes Case for Selective Chinese Tariffs
On behalf of some of the nation’s prominent auto parts and other metal products, William Gaskin, president of the Precision Metalforming Association, has been making a strong case to urge the U.S. to end dumping duties on steel from China and other countries. Now he’s part of a coalition backing legislation that might increase tariffs on a wide range of other Chinese imports...more
- 07 August 2007 -
Enthone Breaks Ground for Applications Laboratory
Enthone Inc., a business of Cookson Electronics, has announced the construction of an advanced plating applications laboratory. Located at 350 Frontage Road, West Haven, Conn., the laboratory will be completely operational this September...more
- 07 August 2007 -
NASF Urges Support for Pending House Bill
Representatives Duncan Hunter (R-CA) and Tim Ryan (D-OH) introduced a new, revised bill on June 28, 2007, to address trade imbalances and currency manipulation practices by countries such as China. The proposed legislation (H.R. 2942) titled, The Currency Reform for Fair Trade Act of 2007, provides for the identification of misaligned currency, requires U.S. action to correct the misalignment, and provides other remedies for unfair trade practices...more
- 07 August 2007 -
Technic Executive Pleads Guilty to Sabotaging Rohm & Haas Technology Test
A Technic, Inc. executive pleaded guilty on Wednesday August 1, to a conspiracy charge for trying to sabotage testing of an electroplating solution that rival Rohm & Haas Co. hoped to sell to Intel Corp...more
- 07 August 2007 -
PMA Chief Makes Case for Selective Chinese Tariffs
On behalf of some of the nation’s prominent auto parts and other metal products, William Gaskin, president of the Precision Metalforming Association, has been making a strong case to urge the U.S. to end dumping duties on steel from China and other countries. Now he’s part of a coalition backing legislation that might increase tariffs on a wide range of other Chinese imports...more
|
