News

CCAI Finishing Pavilion at FABTECH 2013 Sold Out!

More than 160 exhibiting companies signed on to promote their products, services, innovative ideas and equipment to finishers interested in all finishing technologies.

The FINISHING Pavilion at FABTECH 2013 in Chicago is officially sold out! That's according to the Chemical Coaters Association International, chief organizer of the Finishing Pavilion. With more than two months from the opening of the show floor, CCAI has packed the FINISHING Pavilion with 168 exhibiting companies that will bring countless products, services, innovative ideas and equipment to finishers interested in all finishing technologies.

“We are thrilled that we have sold out our entire FINISHING Pavilion floor space,” said Anne Goyer, CCAI executive director. “Our growth is an indication that this is where the finishing industry now comes together every Fall. We look forward to welcoming everyone to CCAI’s FINISHING Pavilion in November." 

There, Goyer notes, attendees will find more companies providing more finishing products and services than any other event in North America. In only its fourth year, CCAI has proven that the FINISHING PAVILION at FABTECH is the premier event for industrial finishers!

If your job touches any part of the industrial manufacturing process, CCAI is encouraging finishers to make plans now to attend FABTECH 2013 in Chicago, Nov. 18-21 at McCormick Place Convention Center. FABTECH offers a 360° view of the entire manufacturing process from start to finish. Attendees will see a wide variety of new products and services along with live demonstrations and valuable information to help improve their finishing operations.

Also, don't forget to register for CCAI’s Finishing Conference. Known for providing outstanding technical conferences, CCAI’s FINISHING Conference features more than 40 hours of educational sessions devoted to a wide variety of finishing topics. Basic sessions include electrocoating, system design, powder coating, cleaning & pretreatment and running efficient paints systems. There will be sessions covering finishing essentials such as how to achieve excellent finishes, getting hooked on paint racks, manual powder coating and finishing operations impact on our environment. Finally, innovative sessions discuss mechanical finishing, porcelain enamel, cost savings for powder coating, application equipment, getting ready for an OSHA or EPA visit and more.

FABTECH is the largest finishing show in North America featuring all finishing technologies. Now is the time to register to see all technologies in action on the show floor. Click on the green REGISTER arrow on the top of the FABTECH home page, www.fabtechexpo.com, to register. Attendees can register for the exhibits for FREE until November 15, by entering Priority Code FB13 during the on-line registration process. Thereafter, a $50 registration fee applies for the show. FINISHING PAVILION exhibitors can also provide you with a show ticket that will allow you FREE on-site show registration, saving you the $50 registration fee. Contact any FINISHING Pavilion Exhibitor for a show ticket to use on-site if you cannot pre-register by November 15.

REGISTER NOW for conference sessions to save big! You can obtain a 15% discount off of all conference registration fees by entering Promo Code: GP5EXSP when registering. You can save additional money by registering prior to October 4 (the early bird registration deadline). Conference fees go up after October 4th. Also, CCAI Members Save an Additional $25 off per session! CCAI members must have their membership number available when registering to get the member discount. Call the CCAI office at 859-356-1030 if you cannot locate your membership number. Go to www.fabtechexp.com and click the REGISTER arrow at the top of the page.
 

Share this article

More services

 

This article is featured in:
Cleaning, Pretreatment & Surface Preparation  •  Coating Systems & Equipment  •  Industry Trends & Happenings  •  Paint & Powder Coating Applications  •  UV Curing & Drying

 

Comment on this article

You must be registered and logged in to leave a comment about this article.