Enhanced Automation of Plating and Metal Finishing Barrel Process Operations Using Automatic Barrels for Bulk Finishing

16 December 2009
Ray Singleton, Singleton Corporation

Metal finishing barrel operations are used most often for “bulk” finishing of large quantities of parts. They are the most efficient method for finishing bulk parts and any pieces that do not require individual handling. A hoist system is generally used to transfer the loaded metal finishing barrel assemblies from one process station to the next.

Creating an account only takes a few moments and will give you instant access to hundreds of specially selected features across the magazine.

This article is featured in:
Automotive • Testing & Control

You must be registered and logged in to leave a comment about this article.